Is it possible to use Foxflash ECU Programmer to read and write Renault sid310? via OBD, bench or boot?
Here is the answer.
OBD and Boot mode both are OK.
1.OBD Driver for Renault Master SID310 is available in foxflash software.
- Renault sid310 with foxflash by Tools Boot mode
Find password ok
Read ok
Write ok
Simple Boot mode instruction for sid310 with foxflash:
Step 1: Find Password
Step 2: Read and write ECU
Step 1: Find Password
Connect foxflash and the vehicle via OBD cable
Run FoxFlash Manager and foxflash software
Enter select driver interface
Select TOOLS BOOT MODE>> INFINEON TROCORE Tool Password>> OBD PASSWORD SID310 RENAULT- NISSAN- MERCEDES
Click on “Find password” and follow the on- screen message to do.
For some models, the password can also be found on the desk by connecting the following pinout.
SIEMENS SID310 [TC1791 INT.F.] – Renault, Nissan, Mercedes PINOUT:
PIN G1, G2, D1 (Red): +12 V
PIN H4 (Black): Ground
PIN A4 (Blue): CAN-H
PIN A3 (Orange): CAN-L
Step 2: Read and write ECU
After the password is found, then go to read and write ECU in sequence.
Follow the PINOUT to connect Foxflash ECU Chip Tuning Tool and ECU via the multifunction cable
PIN G1, G2 (Red): +12 V
PIN H4 (Black): Ground
PIN D1 (Green): IGNICTION
PIN A4 (Blue): CAN-H
PIN A3 (Orange): CAN-L
Then Select driver>> TOOLS BOOT MODE>> INFINEON TRICORE Boot>> SAK TC1791
Read Int Flash Micro and save the data
Then write Int Flash Micro
Besides, Godiag GT105 OBDII Breakout also can work with sid310 to read password on bench then boot mode to read and write.
Skype: foxflash.co.uk
Whatapp: +86 152 7181 3909
foxFlash official site:https://www.foxflash.co.uk