One customer gave feedback that FoxFlash read Opel Delco E98 ID and Flash without problem but app crashed when reading EEPROM and Backup.
So, is FoxFlash Tool possible to work on the real challenge Delco E98?
Yes, Flash+ EEPROM read/write.
Here are some ways we could try:
1.Remove all power from ECU and wait few minutes, reconnect cables and try again with EEPROM
2.Try to read Flash/ Eerpom/ backup at 13.6V
3.Ensure a good network support
Feedback:
Delco E98, Writing ok, Checksum by tool, Car start and drive.
1.Disconnected all, reconnected , power removed , waited 10 min. No change .
2.Backup succesful read only on 13.6V, above those Volts,reading bar comes to the end and app crash… no file saved after crash , 13.6 all good
3.Read Eprom Backup app crash. Succes on reading flash, eprom, backup when conecting to a different wifi network..didnt work on hotspot from mobile-5G,4G
Skype: foxflash.co.uk
Whatapp: +86 152 7181 3909
foxFlash official site:https://www.foxflash.co.uk