Foxflash bench box works with OBD and direct connect bench. If the bench box doesn’t have a connection, how to do a self-test?
Here is the simple operation guide.
1.Connect Foxflash tool and a computer via the USB cable
Connect the Bench Box to foxflash ECU programmer and power it through the round jack of the bench box itself or from the round jack of foxflash.
2.Run foxflash Manager
Select TOOLS BENCH MODE>> TEST for BENCH BOXES>> TEST BENCH BOX V2
Click Info to read the test note
This driver is useful for testing the Bench Box V.2
During the test:
The relays will be triggered at different speeds.
The red LED will flash several times.
3.Click Start Test
Make sure the bench box is connected without ECU and powered.
Test bench box V2 successfully
NOTE:
If the bench box self-test result is fine, but foxflash software has no communication, the problem may be the voltage, ECU or wiring connection. Please try to check one by one.
Tech support:
Skype: foxflash.co.uk
Whatapp: +86 152 7181 3909
foxFlash official site:https://www.foxflash.co.uk