Tuning and diagnostics for modern Volkswagen Audi Group (VAG) vehicles just took another major leap forward. Magicmotorsport has officially released Flex version 8.27.0.0, expanding Korhex support to VAG Bosch MDG1 control units powered by Infineon TriCore TC298 and TC299 processors.
While these advanced Bosch MDG1 units were previously supported via Voltage Fault Injection (VFI), the addition of Korhex support drastically simplifies the unlocking workflow for ECU technicians and engine tuners.

What’s New in Flex v8.27.0.0?
The latest Flex update introduces a faster, less invasive method to unlock and program VAG group Bosch MDG1 engine control units (ECUs).
Key Upgrades & Benefits:
-
No Direct PCB Intervention: The Korhex unlock procedure reduces hands-on intervention time and avoids the need to work directly on the internal printed circuit board (PCB).
-
Direct Bench Programming: Once the control unit is unlocked, technicians can complete full Read and Write operations directly in Bench mode, drastically streamlining the chip tuning or cloning process.
-
Rapid Speeds: Connection setup takes around 30 seconds, full reading takes roughly 2.5 minutes, and writing completes in just 2 minutes.
Technical Breakdown & Supported ECUs
This update targets key Bosch MG1 (gasoline) and MD1 (diesel) controllers built on the high-performance TC298 and TC299 processor architectures.
| ECU Model | Processor Architecture | Working Mode | Operations Supported |
| Bosch MG1CS002 H80 | Infineon TC298 | Boot Glitch | Read/Write/Checksum Int. Flash, Int. EEPROM, Full Backup |
| Bosch MG1CS008 | Infineon TC298 | Boot Glitch | Read/Write/Checksum Int. Flash, Int. EEPROM, Full Backup |
| Bosch MG1CS031 H80 | Infineon TC298 | Boot Glitch | Read/Write/Checksum Int. Flash, Int. EEPROM, Full Backup |
| Bosch MD1CS004 H80 | Infineon TC298 | Boot Glitch | Read/Write/Checksum Int. Flash, Int. EEPROM, Full Backup |
| Bosch MD1CS014 | Infineon TC299 | Boot Glitch | Read/Write/Checksum Int. Flash, Int. EEPROM, Full Backup |
Performance Benchmarks:
-
Connection Time: ~30 seconds
-
Reading Time: ~2 minutes 30 seconds
-
Writing Time: ~2 minutes
Supported Vehicles Highlight
Flex v8.27.0.0 brings bench support to a wide variety of high-performance and modern VAG platforms, ranging from everyday diesel hatchbacks to modern super-SUVs:
-
Audi SQ5 (FY, 2021MY) – 3.0L V6 TDI 24v MHEV (336 HP)
-
Audi RS5 (F5, 2022MY) – 2.9L V6 Twin-Turbo 24v (444 HP)
-
Cupra Formentor (SE316, 2021MY) – 2.0L TSI 16v (187 HP)
-
Lamborghini Urus S (2022MY) – 4.0L V8 Twin-Turbo 32v (657 HP)
-
Volkswagen Golf VIII (2021MY) – 2.0L TDI 16v (197 HP)
License Requirements
To unlock and utilize the new Korhex protocol on these TC298/TC299 VAG control units, ensure your Magicmotorsport tool is configured with either of the following licenses:
-
FLS0.20 (Boot Glitch license) — Master / Slave
-
FLS0.5 (Flex Full Package) — Master / Slave





