FoxFlash ECU Programmer Software Download and Installation

This article aims to show how to download, install, register and activate FoxFlash ECU Chip Tuning Tool software for customers who are the first time to use it.

Compatible operating systems:

Windows 7

Windows 8/8.1

Windows 10

Windows 11

Recommended minimum requirements:

CPU > 2.5 GHz (Intel i5, i7)

RAM > 4GB

64 bits

Maximum number of computers available:

Up to 3

Software language:

Italian, English, Dutch, French, Spanish, Polish, Portuguese, Czech, Romanian, Turkish

Step 1: Download Foxflash software:

Connect FoxFlash ECU programmer to laptop/PC with the USB cable

Make sure the laptop or PC connect to internet as well

Go to www.dfb-technology.com website

Click Download, and click foxFlash Manager tool

Enter your available email and phone number

Click Download to start downloading software

Step 2: Install Foxflash software

After download, double click FoxflashManagerSetup.msi and run it to install easily

*The setup requires the .NET Framework version v4.7.2 above. If you don’t have installed, click Yes to obtain it from the web. Close the anti-virus software. Otherwise, you cannot install the software.

After installation, foxFlash software needs to register and activate before using.

Step 3: Register Foxflash software

1.Run FoxFlash Manager program on the desktop

2.It will ask you to register at the first time to use. Just click Yes to continue.

3.Input your available email and click Submit

Then you will get the message ‘User successfully created. Please contact vendor to activate.’

Step 4: Activate Foxflash software

1.Check the SN on the backside of your foxFlash box.

*Don’t spread the SN to anyone. It’s a safe code for you. Don’t let any third party or guys know that code or it will let your tool be locked.

2.Send that SN to email: info@dfb-technology.com for activation and link your tool to your email. (Your tool will be locked if you don’t send to be activated)

3.Enter the SN code obtained from your dealer to activate foxFlash software

*Make sure the SN code input is correct. If you input a wrong code, you will get the error prompt ‘activation failed. Enter code provided by your vendor. Try again.’

Now FoxFlash software is ready to use online.